X360+v+410+top !exclusive! May 2026

| Criteria | X360 V 410 Top | Haas VF-2 | DMG Mori CMX 600 | |----------|----------------|-----------|------------------| | | $$ (Mid-range) | $$$ | $$$$ | | Spindle Speed (std) | 12,000 RPM | 8,100 RPM | 10,000 RPM | | Rapid Traverse | 36 m/min | 24 m/min | 30 m/min | | Controller Ease-of-Use | Very High (Fanuc) | High (Haas native) | Moderate | | Service Support in NA | Good (distributor) | Excellent | Good (limited locations) |

Standard is 2 years parts and 1 year labor. Negotiate for a 3-year warranty on the spindle (it’s the most expensive repair). x360+v+410+top

A: The X360 V 410 Top has a direct drive port on the control for a 4th axis rotary table. A full 5-axis is not advised due to Z-clearance limits (510mm is tight for trunnion tables). Final Verdict: Should You Buy the X360 V 410 Top? Buy it if: You are a growing shop that needs faster cycle times than entry-level machines, but you cannot justify a $100k+ European VMC. The X360 V 410 Top delivers 85-90% of the performance at 60% of the price. | Criteria | X360 V 410 Top |

For 90% of job shops and small automotive suppliers, the represents the "sweet spot" of modern CNC machining—fast, accurate, and maintainable. Have you run an X360 V 410 Top in your facility? Share your cycle time improvements in the comments below. For a detailed quote with the "Top" package options, contact your regional distributor with part drawing ready. A full 5-axis is not advised due to