Pq Grit Kit 2 Repack Upd May 2026
A: The PQ Grit Kit 2 holds exactly 75 lbs of 30/60 garnet (approximately 1.5 cubic feet). Buy a 100 lb bag and keep 25 lbs for top-ups.
By: Industrial Abrasives Journal
On the PQ Grit Kit 2, the top lid is held by a cam-lock system. Release the locking levers. Lift the lid. Note: If any residual pressure is present, the lid will not budge—do not force it. pq grit kit 2 repack
Close and lock the cam levers. Reconnect the air and abrasive lines. Slowly open the main air valve. Check for audible leaks at the lid and fittings. Spray with soapy water if needed. A: The PQ Grit Kit 2 holds exactly
A: No. Norton explicitly allows user refilling. However, using non-recommended abrasives (e.g., silica sand) will void the warranty and your lungs. Release the locking levers
A: Technically yes, but practically no. Mixing 20/40 with 80/120 creates a "binary blend" that causes erratic flow. Stick to one mesh size per repack. Conclusion: Repack Smarter, Not Harder The PQ Grit Kit 2 repack is the single most effective way to reduce your abrasive blasting operating expenses while maintaining peak performance. By following the step-by-step procedure above—inspecting components, choosing the right garnet mesh, and replacing gaskets—you transform a disposable consumable into a permanent asset.
Slowly pour your selected grit into the vessel through the top opening. Do not overfill. The PQ Grit Kit 2 has a max fill line etched inside the tank (approximately 3 inches from the top). Overfilling leads to bridging.
