Article ID: OA-ONE100-INST-001 Product Line: OneAccess One100 Series Target Audience: Field Technicians, Network Engineers, System Integrators Keyword Focus: oneaccess one100 installation manual oneaccess top Introduction to the OneAccess One100 Platform The OneAccess One100 series represents a breakthrough in cost-optimized, high-performance customer premises equipment (CPE). Designed for branch offices, retail environments, and managed services, the One100 delivers carrier-grade routing, security, and VPN capabilities.
A: Yes, if the previous configuration has SSH or HTTP enabled. However, for first-time installation, the oneaccess one100 installation manual strongly recommends console access. oneaccess one100 installation manual oneaccess top
# write erase # reload Confirm “Are you sure?” → . The device will reboot to default settings (192.168.1.1, admin/admin). 5.3 Enable SSH for Remote Management (Secure Top Access) Disable Telnet immediately: for first-time installation
(config)# crypto key generate rsa modulus 2048 (config)# ip ssh version 2 (config)# line vty 0 4 (config-line)# transport input ssh (config-line)# login local (config-line)# exit (config)# username remote-admin password StrongP@ssw0rd Now connect via ssh remote-admin@192.168.1.1 . | Symptom | Likely Cause | OneAccess Top Fix | |---------|--------------|-------------------| | No PWR LED | Faulty power supply | Test voltage; replace adapter. | | SYS LED blinking forever | Corrupted image | Enter bootloader (CTRL+C during boot) → boot flash backup | | Cannot reach 192.168.1.1 | ETH1 misconfigured | Console in → # show interface eth1 → check no shutdown . | | DHCP not assigning IP | Pool exhausted | # show ip dhcp binding → clear lease: # clear ip dhcp binding * | | USB modem not detected | Missing driver | # show usb devices → if empty, try modem in MBIM mode. | Part 7: Frequently Asked Questions (FAQ) Q1: What is the difference between One100 and OneAccess Top? A: One100 is the hardware model. “OneAccess Top” is an operational term meaning full administrative privileges (level 15). You need Top access to install or reconfigure the One100. and managed services
A: No. The One100 requires the included 12V DC adapter. PoE injectors for uplink are not supported.
OneAccess login: Login with admin / admin (or the serial number from the label).
(config)# interface eth0 (config-if)# description WAN_Uplink (config-if)# ip address dhcp (config-if)# no shutdown (config-if)# exit For static IP: