Keyence Gs-11pc Manual

| Parameter | Value | | :--- | :--- | | Measuring range | 11 mm | | Resolution | 0.001 mm (1 µm) | | Accuracy (linearity) | ±0.003 mm (within 0-10 mm) | | Measuring force (spring) | 1.5 N ±20% at center stroke | | Max. response speed | 1.0 m/s | | Durability (spindle life) | 10 million cycles | | Operating temperature | 0 to 40°C (32 to 104°F) | | Storage humidity | 35 to 85% RH (non-condensing) | | Cable length | 2.5 m (standard, fixed) | | Protection rating | IP40 (not dust-tight; keep away from coolant) |

| Pin No. | Signal Name | Description | Wire Color (Typical) | | :--- | :--- | :--- | :--- | | 1 | A Phase | Output signal A (0° phase) | White | | 2 | B Phase | Output signal B (90° phase) | Blue | | 3 | +5V | Power supply (Stabilized 5V DC) | Red | | 4 | GND | Common ground (0V) | Black | | 5 | Shield | Cable shield / Frame ground | Bare wire | | 6 | Z Phase (Origin) | Zero/Index pulse (once per revolution) | Orange | | 7 | NC | Not connected | – | | 8 | NC | Not connected | – | | 9 | NC | Not connected | – | | 10 | NC | Not connected | – | | 11 | NC | Not connected | – | keyence gs-11pc manual

The GS-11PC uses a . The manual lists the following pin assignments (standard for most Keyence GS sensors): | Parameter | Value | | :--- |

If you are searching for the “Keyence GS-11PC manual,” you are likely holding a high-precision contact-type digital gauge sensor head that needs to be connected, calibrated, or debugged. You may have discovered that Keyence does not always keep decades-old manuals readily available on their front page, or you might be looking for a specific wiring diagram for the 11-pin connector. The manual lists the following pin assignments (standard

This article serves as a comprehensive resource. We will cover where to find the official PDF manual, provide a breakdown of the GS-11PC specifications, explain the pinout (since this is the most common reason people search for the manual), and offer step-by-step troubleshooting and connection guides. The Keyence GS-11PC is a high-accuracy, spring-loaded, digital displacement sensor head . It is part of Keyence’s legacy “GS” series, designed to be used with standalone display units like the Keyence RD-50 or LV-series controllers.

Unlike standard dial gauges (mechanical), the GS-11PC converts linear displacement (movement of the spindle) into an electronic digital signal. This allows PLCs (Programmable Logic Controllers) and data loggers to read thickness, warpage, or depth in real-time.