Jis Z 1707 < WORKING • Blueprint >

Whether you are a converter producing film, a packaging engineer specifying materials, or a procurement professional vetting suppliers, mastering JIS Z 1707 will ensure that your polyethylene film performs consistently – from laboratory testing to the final end-use environment.

| Parameter | JIS Z 1707 (Japan) | ASTM D2103 (USA) | ISO 11248 (International) | |-----------|---------------------|------------------|----------------------------| | Tensile strength requirement | Higher (≥ 19.6 MPa) | Lower (≥ 13.8 MPa typical) | Moderate (≥ 16 MPa) | | Tear strength | Mandatory for heavy-duty | Not always tested | Optional | | COF specification | Strict range | Not specified | Not specified | | Thickness tolerance | Tighter (±7-10%) | Looser (±15% typical) | Moderate (±12%) | jis z 1707

Yes, under Type 3 (special quality). Additional surface resistivity requirements (typically ≤ 1×10¹¹ Ω/sq) must be agreed separately. Whether you are a converter producing film, a

Only if specifically agreed between buyer and seller, and clearly marked on the product. Standard compliance assumes virgin resin. Only if specifically agreed between buyer and seller,