Remember that while this guide provides the core technical details found in a standard datasheet, critical information such as exact register bit fields, AC timing charts, and PCB layout reference footprints must be obtained from the official Himax datasheet under NDA.
Introduction In the world of display interface ICs, the bridge between legacy parallel RGB signals and modern high-speed serial interfaces is critical. The HX8872-C is one such specialized integrated circuit designed to act as a bridge, converting RGB (24-bit parallel) to MIPI DSI (Display Serial Interface) . hx8872-c datasheet
| Parameter | Symbol | Min | Max | Unit | | :--- | :--- | :--- | :--- | :--- | | I/O Supply Voltage | VDDIO | -0.3 | 3.96 | V | | Core Supply Voltage | VDDC | -0.3 | 1.32 | V | | Input Voltage on RGB pins | VIN | -0.3 | VDDIO+0.3 | V | | Storage Temperature | Tstg | -40 | +125 | °C | | ESD (Human Body Model) | HBM | -2 | +2 | kV | For reliable operation, maintain these conditions: Remember that while this guide provides the core
If you are searching for the hx8872-c datasheet , you are likely working on a project involving a small-to-medium sized LCD panel (typically 480x854 to 720x1280 resolution) that requires a high-speed, low-power serial interface. This article consolidates the critical technical data typically found in the official datasheet, including electrical characteristics, pin configuration, timing diagrams, and reference design guidelines. | Parameter | Symbol | Min | Max
// Soft reset to apply settings GPIO_Write(RESET_PIN, LOW); delay_ms(10); GPIO_Write(RESET_PIN, HIGH); delay_ms(120); // Wait for PLL lock Below is the typical connection diagram found in the hx8872-c datasheet for an SoC (like STM32, i.MX, or Allwinner) driving a MIPI DSI LCD.