Have a specific issue with your HannStar board? Describe the failure in the comments below—our community of repair technicians will help you decode it. Disclaimer: This guide is based on reverse-engineered data and public repair logs. Always discharge capacitors and use ESD protection when handling PCBs. The author is not affiliated with HannStar Display Corporation.
By: Technical Repair Team | Updated: October 2024 hannstar k mv 4 94v 0 manual
| Pin | Signal | Pin | Signal | |-----|--------|-----|--------| | 1 | GND | 16 | RxIN3+ | | 2 | VCC 3.3V | 17 | GND | | 3 | VCC 3.3V | 18 | RxCLKIN+ | | 4 | VCC 3.3V | 19 | RxCLKIN- | | 5 | GND | 20 | GND | | 6 | RxIN0- | 21 | LVDS SEL (H/L) | | 7 | RxIN0+ | 22 | GND | | 8 | GND | 23 | PANEL_PWR_EN | | 9 | RxIN1- | 24 | BKLT_EN (Backlight enable) | | 10 | RxIN1+ | 25 | BKLT_ADJ (PWM dimming) | | 11 | GND | 26-30 | Reserved / NC | Have a specific issue with your HannStar board
If you have landed on this page, you are likely holding a circuit board or a display component marked with the cryptic code: You are searching for the manual—specifically, the datasheet, pinout diagram, or service guide for this mysterious board. Always discharge capacitors and use ESD protection when