|
|
<key>framebuffer-con2-enable</key> <data>01000000</data> <key>framebuffer-con2-type</key> <data>00080000</data> If that fails, try busid patching. Add framebuffer-con2-busid with <data>01000000</data> and cycle through values (01, 02, 04) until the screen lights up. Step 3: The "Ignore the only HDMI" trick (Laptops only) On laptops, the HDMI port is often hardwired to the dGPU (Nvidia/AMD), which macOS cannot use post-High Sierra. You cannot fix this. The only workaround is a DisplayLink USB to HDMI adapter . Part 4: The AMD dGPU HDMI Fix (RX 5000/6000/7000 series) AMD cards are generally easier, but they have two specific plagues: Black screen on boot and No signal after sleep . Fix 1: The Navi Black Screen ( agdpmod=pikera ) If you own an RX 5600, 5700, 6600, 6800, or 6900 XT, add this to your boot-args immediately:
| Key | Type | Value | Description | | :--- | :--- | :--- | :--- | | framebuffer-conX-enable | Data | 01000000 | Enable patching for connector X (replace X with 0,1,2) | | framebuffer-conX-type | Data | 00080000 | Set connector type to | | framebuffer-conX-flags | Data | 00000000 | Disable weird flags | | framebuffer-patch-enable | Data | 01000000 | Master patch enable |
You plug in your external monitor, your TV, or your second display, and… nothing. A black screen. A pink tint. Glitchy artifacts. Or worse, the system freezes the moment you connect the cable. hackintosh hdmi fix
-raddsc
macOS hides HDMI audio outputs unless the GPU sends a specific EDID (Extended Display Identification Data) handshake. The Framebuffer Audio Patch (for iGPU) Add this to your iGPU DeviceProperties : You cannot fix this
Add these properties to your config.plist under DeviceProperties -> PciRoot(0x0)/Pci(0x2,0x0) :
DisplayPort is natively what Apple uses. HDMI is an emulated layer. Fix 1: The Navi Black Screen ( agdpmod=pikera
agdpmod=pikera
| Â |