E07-m1101d Pinout [patched] -

:

| e07-m1101d | ESP32 GPIO | Function | |------------|------------|-------------------| | VCC | 3.3V | Power | | GND (pin1) | GND | Ground | | SI (pin3) | GPIO23 | SPI MOSI | | SCK (pin4) | GPIO18 | SPI SCK | | SO (pin5) | GPIO19 | SPI MISO | | CSn (pin6) | GPIO5 | SPI SS | | GDO2 (pin7)| GPIO4 | Interrupt / status| | GDO0 (pin8)| GPIO2 | Optional | | RESET (pin9)| 3.3V via 10k| Pull-up | | GND (pin10)| GND | Extra ground | e07-m1101d pinout

Whether you’re designing a remote sensor network, a garage door opener, or a home automation hub, the e07-m1101d’s flexible pinout and CC1101’s powerful features make it an excellent choice. Always refer back to this guide when wiring your module, and don’t forget to check Ebyte’s official datasheet for register-level details. : | e07-m1101d | ESP32 GPIO | Function

: Download Ebyte’s configuration software (RF_Setting.exe), experiment with GDO2 as an interrupt for packet reception, and explore the module’s wake-on-radio capabilities for battery-powered projects. Have questions about specific e07-m1101d pinout scenarios? Leave a comment or contact Ebyte’s technical support for application-specific advice. Have questions about specific e07-m1101d pinout scenarios

Introduction In the world of embedded systems and wireless communication, the e07-m1101d stands out as a highly efficient, low-power RF module. Developed by Chengdu Ebyte Technology, this module is based on the Texas Instruments CC1101 transceiver IC. It operates in the sub-1GHz frequency bands (315/433/868/915 MHz), making it ideal for smart home devices, industrial sensors, remote controls, and IoT gateways.

: