Its V1.1 revision specifically marks it as a "debugged" version of a once-ubiquitous chipset. Whether you are using it to restore a vintage receiver, build a lightweight DVB feed monitor with a Raspberry Pi, or simply understand how QPSK demodulation works, the dvbs-evb-kd1100hd-v1.1 is a tool that proves older technology still has immense educational and practical value.
If you are currently holding a non-functional receiver containing a KD1100HD, open the case. If the PCB says REV 1.1 , do not throw it away. Salvage this board, wire it to a USB port, and breathe new digital life into it with Linux DVB drivers. Have you successfully used a dvbs-evb-kd1100hd-v1.1 in a project? Share your serial console dumps and driver configurations in the comments below. dvbs-evb-kd1100hd-v1.1
This designation is not a model number for a commercial receiver you would find on a retail shelf. Instead, it points to an based around a specific DVB-S (Digital Video Broadcasting — Satellite) demodulator and tuner chipset, likely built on a version 1.1 PCB revision. For hobbyists, embedded engineers, and firmware developers dealing with legacy satellite systems, understanding this board is key to debugging, recovery, and custom driver development. Its V1
| Feature | dvbs-evb-kd1100hd-v1.1 | Modern Card (e.g., TBS 6903) | | :--- | :--- | :--- | | | DVB-S (Legacy) | DVB-S2 (High Efficiency) | | Max Bitrate | ~45 Msps | ~100 Msps | | 4:2:2 Feeds | Unlikely | Supported | | HEVC (H.265) | No | Yes (hardware decode) | | Cost | ~$10-20 (salvage) | >$200 | If the PCB says REV 1
Introduction: The Forgotten Backbone of DVB-S Innovation In the fast-paced world of consumer electronics, we often focus on the polished end product—the set-top box (STB) sitting under a television or the USB tuner plugged into a media center PC. However, beneath every reliable piece of satellite reception hardware lies a prototype, a reference design, or an evaluation board. One such intriguing piece of engineering is the dvbs-evb-kd1100hd-v1.1 .