Aiav-005 -upd- ~repack~ [LATEST]

(requires authenticated login): https://support.aiav-tech.com/firmware/Aiav-005 -UPD- .bin SHA-256 Checksum: e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 Last updated: March 9, 2025. Information subject to change. Always consult the official hardware manual before performing any firmware update.

Aiav-005# show version > Firmware: Aiav-005 -UPD- (build 2025-02-28) > Bootloader: v2.1 > Secure boot: ENABLED To quantify improvements, we conducted standardized tests using a production-like environment (100 Modbus slaves + 5 MQTT subscribers). Results below: Aiav-005 -UPD-

Introduction to Aiav-005 -UPD- The release of Aiav-005 -UPD- marks a significant milestone for developers, system integrators, and end-users relying on the Aiav-005 hardware platform. Whether you are managing an industrial automation network, a smart IoT deployment, or a proprietary embedded system, this update introduces critical patches, feature rollouts, and security hardening measures. (requires authenticated login): https://support

Aiav-005# diag run all Expected output: All tests PASSED. Aiav-005 -UPD- signature valid. Aiav-005# show version > Firmware: Aiav-005 -UPD- (build

| Metric | Aiav-005 v4.3 (baseline) | Aiav-005 -UPD- | Improvement | |--------|---------------------------|----------------|--------------| | MQTT publish rate (QoS 1) | 1,200 msg/sec | 1,890 msg/sec | +57.5% | | Flash boot time | 3.2 seconds | 2.1 seconds | -34% | | Secure session establishment (TLS handshake) | 840 ms | 410 ms | -51% | | CAN bus throughput (1Mbps) | 7,200 fps | 7,950 fps | +10.4% | | Average power (active, 25°C) | 210 mW | 178 mW | -15.2% |

Downgrading is not supported over OTA. You must use the serial console.

Check the active firmware version: